Understanding the Causes of Blocks and Solutions in Drain Cleaning


07 Dec

In order for users in a building or house to have a smooth and effective activities, there should be a provision of clean water and effective waste drainage. A healthy and safe environment is ensured to the owners and tenants of buildings if there is a proper drainage of waste from these buildings. 

There are circumstances that would have drains blocking. In order to carry out drain cleaning, you would then need the services of a skilled plumber. If the wastes will be properly drained by this technician, you will be assured of a clean environment in your building. Learn more about Philadelphia backflow preventers here.

We would resort to drain cleaning of our building when at one point or another drains are blocked. Blocked drains are caused by many circumstances. One reason is that there could be foreign objects that are too big to pass through the drains that are flushed in toilets. Another situation is that hairs may be washed down the sink and have accumulated in the drainage thus causing blockage of the drain pipes. Other substances like grease and fats which we usually wash down the sink could get stuck on the sides of our drainage pipes.

Other circumstances that would cause drain blockage in time are leaves which are not properly swept off and disposed off in garbage that would find their way into the drainage pipes, and even roots of trees, because they are attracted to moisture, will crack the pipes to get water and this could cause blocked drains.

One of the ways that a plumber at http://www.mrdsplumbing.com/commercial.php can conduct drain cleaning is with the use of a hydrojetter. With water that is under very high pressure, a hydrojetter would release it and thus remove all the dirt that are blocking the drains. The plumber will lower the instrument into the drain and pushes it until it reaches the blocked area. With the use of the pressurized water from the hydrojetter, blockage will result to small particles, substances that are on stuck onto the sides of the pipes will be rid off, and so allowing the waste to flow freely out the drain.

Referred to as the drain auger is the drain snake, another method to solve drain blockage, and this instrument has wires that are pushed down the drain up to the location where blockage is happening. The wires at the end of the cord will then be turned by the motor of the instrument causing the obstructions to break down into small particles, then these particles are pushed down the drain and there is a free flow of waste down the drain then. 

In order to conduct an efficient drain cleaning, the plumber has to be able to identify the blockage location.

Comments
* The email will not be published on the website.
This site was built using